Evaluation of the degree of residue accumulation from polishing systems on different types of composite resins
DOI:
https://doi.org/10.56294/sctconf2024.677Keywords:
dentistry, Kruskal-Wallis, dental prosthesisAbstract
Success in any restorative dental treatment, as well as compliance with aesthetic standards. The objective is to evaluate the degree of residue accumulation from polishing systems on different types of composite resins. The methodology used is characterized by being comparative and experimental in nature, and covers a total of forty resin samples that have been systematically divided into four different groups for analysis. The data generated from the experimentation were meticulously analyzed using the non-parametric Kruskal-Wallis test, with the significance level set at P < 0.05 to ensure the reliability of the results. Results revealed that the group using 3M™ Filtek™ Z350 XT Resin combined with Nsk Composite Polishing Kits showed the highest levels of residual residue left on the resin surfaces after polishing. In contrast, the group using Neofil's nanohybrid composite KERR resin in conjunction with the Alfred Becht GmbH polishing system demonstrated the most effective performance, leaving the least amount of residue on the treated surfaces. The application of Neofil nanohybrid composite KERR resin in combination with the Alfred Becht GmbH polishing system may represent a sensible and rational choice to achieve optimal finishing results on tooth surfaces, thereby improving both the aesthetic appeal and functional longevity of the teeth. restorative treatments
References
1. Pinheiro E de S, Gomes M da CSA, Ferreira SR dos S, Silva CR, Lucena YSM de, Andrade SM de, et al. Fatores que influenciam na longevidade de restaurações diretas: Uma revisão integrativa. Res Soc Dev. 2021 Jun 29;10(7):e45510716114.
2. Aydın N, Topçu FT, Karaoğlanoğlu S, Oktay EA, Erdemir U. Effect of finishing and polishing systems on the surface roughness and color change of composite resins. J Clin Exp Dent. 2021 May 1;13(5):446-54.
3. Jaramillo-Cartagena R, López-Galeano EJ, Latorre-Correa F, Agudelo-Suárez AA. Effect of polishing systems on the surface roughness of nano-hybrid and nano-filling composite resins: A systematic review. Dent J. 2021;9: 108132.
4. Servián L. Importancia del acabado y pulido en restauraciones con resinas compuestas en dientes anteriores. Reporte de caso clínico. Rev Cient Cienc Salud. 2019 May 27;1(1):52-6.
5. Pérez-Rojas E. Diseño y análisis experimental para determinar la porosidad de materiales adsorbentes compuestos. Rev Ingenio. 2019 Jan 1;15(1):23-30.
6. Guisela Janeth LM, Perea-Corimaya E, Portilla-Miranda S, Juela-Moscoso C. FUNDAMENTOS PARA ELEGIR UNA RESINA DENTAL. Rev OACTIVA UC Cuenca. 2019;4.
7. Gaviria-Martinez A, Castro-Ramirez L, Ladera-Castañeda M, Cervantes-Ganoza L, Cachay-Criado H, Alvino-Vales M, et al. Surface roughness and oxygen inhibited layer control in bulk-fill and conventional nanohybrid resin composites with and without polishing: in vitro study. BMC Oral Health. 2022 Dec 1;22(1): 34-75.
8. Aydın N, Karaoğlanoğlu S, Oktay EA, Ersöz B. Superficial Effects of Different Finishing and Polishing Systems on the Surface Roughness and Color Change of Resin-Based CAD/CAM Blocks. Odovtos Int J Dent Sci. 2021 Apr 21; 247-57.
9. Hervás García A, Angel M, Lozano M, Cabanes Vila J, Escribano AB, Galve PF, et al. Resinas compuestas. Revisión de los materiales e indicaciones clínicas. 2016.
10. St-Pierre L, Martel C, Crépeau H, Vargas M. Influence of Polishing Systems on Surface Roughness of Composite Resins: Polishability of Composite Resins. Oper Dent. 2019 May 1;44(3):E122-32.
11. Pietrokovski Y, Zeituni D, Schwartz A, Beyth N. Comparison of Different Finishing and Polishing Systems on Surface Roughness and Bacterial Adhesion of Resin Composite. Materials. 2022 Oct 22;15(21):7415.
12. Vishwanath S, Kadandale S, Kumarappan S kumar, Ramachandran A, Unnikrishnan M, Nagesh H manjiri. Finishing and Polishing of Composite Restoration: Assessment of Knowledge, Attitude and Practice Among Various Dental Professionals in India. Cureus. 2022 Jan 3.
13. Lima Júnior DA de, Nogueira Filho R, Batista MRA de J, Couto GAS do, Lima DM, Firoozmand LM. Qual a importância do acabamento e polimento em restaurações diretas de resinas compostas nos dentes anteriores? Res Soc Dev. 2022 Sep 23;11(12):e535111234561.
14. Duque JA, Duarte MAH, Canali LCF, Zancan RF, Vivan RR, Bernardes RA, et al. Comparative Effectiveness of New Mechanical Irrigant Agitating Devices for Debris Removal from the Canal and Isthmus of Mesial Roots of Mandibular Molars. J Endod. 2017 Feb 1;43(2):326-31.
15. Gutierrez-Leiva A, Pomacóndor-Hernández C. Comparación de la profundidad de polimerización de resinas compuestas bulk fill obtenida con dos unidades de fotoactivación LED: polywave versus monowave. Odontol Sanmarquina. 2020 May 6;23(2):131-8.
16. Silva JP, Coelho A, Paula A, Amaro I, Saraiva J, Ferreira MM, et al. The influence of irrigation during the finishing and polishing of composite resin restoration-a systematic review of in vitro studies. Materials. 2021;14(14): 1-25.
17. Marufu C, Kisumbi BK, Osiro OA, Otieno FO. Effect of finishing protocols and staining solutions on color stability of dental resin composites. Clin Exp Dent Res. 2022 Apr 1;8(2):561-70.
18. Daher R, Krejci I, Di Bella E, Marger L. Evaluation of the Validity of Digital Optical Microscopy in the Assessment of Marginal Adaptation of Dental Adhesive Interfaces. Polymers (Basel). 2022 Jan 1;14(1): 85-105.
19. Diego Melendez D, Mas J, Tay L. Sistemas de pulido para restauraciones cerámicas. Revisión de la literatura. Rev Estomatol Herediana. 2023 Mar 31;33(1):68-75.
20. Quirynen M, Marechal M, Busscher HJ, Weerkamp AH, Darius PL, Steenberghe D. The influence of surface free energy and surface roughness on early plaque formation. An in vivo study in man. J Clin Periodontol. 1990 Mar;17(3):138-44.
21. Tonato-Hidalgo JD, Loor-Tobar NS, Gavilánez-Villamarín SM, Armijos-Moreta JF. Influencia del uso de prótesis dental en la calidad de vida de los adultos mayores. Rev Inf Cient [Internet]. 2022;101(6). Disponible en: https://revinfcientifica.sld.cu/index.php/ric/article/view/4054
22. Maldonado Gudiño CW, Castro Morales LG, Carlosama Ponce MB, Olmedo Moreira KK. El impacto del SARS-CoV-2 en la continuidad de negocios en Ecuador durante el año 2020. Dilemas contemp: educ política valores [Internet]. 2024 [cited 2024 Sep 14]; Available from: https://dilemascontemporaneoseducacionpoliticayvalores.com/index.php/dilemas/article/view/4025.
Published
Issue
Section
License
Copyright (c) 2024 Luis Darío Pérez Villalba , Jhonatan Adrian Cajamarca Toapanta , Bryan Javier Quinga Collaguazo , Fernando Asael Bustos Molina (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The article is distributed under the Creative Commons Attribution 4.0 License. Unless otherwise stated, associated published material is distributed under the same licence.
