Finite Element Modeling to Predicting Rutting in Flexible Pavements under Overloading

Authors

  • Zainab M. Aljaleel Civil Engineering Department, College of Engineering, University of Babylon. Babylon, Iraq Author
  • Nahla Y. Ahmed Civil Engineering Department, College of Engineering, University of Babylon. Babylon, Iraq Author
  • Yahya K. Atemimi Civil Engineering Department, College of Engineering, University of Babylon. Babylon, Iraq Author

DOI:

https://doi.org/10.56294/sctconf2024822

Keywords:

Axle Load, Finite Element Method, Rut Depth; Core Extraction, Overloading, Abaqus Software Program

Abstract

Road infrastructure is seriously threatened by heavy vehicle overloading, causing substantial damage, particularly rutting. This study uses advanced finite element analysis (FEA) techniques to improve pavement performance prediction. Six models were created using the ABAQUS/CAE program to evaluate the rutting performance of flexible pavement under overloaded conditions. These models simulated the existing pavement design and a proposed design, each subjected to three axle load configurations: single axle-single tire, tandem axle-dual tire, and tridem axle-dual tire. The research includes conducting surveys on traffic volume and axle load, to precisely evaluate the current traffic situation and identify problems associated with overloading. Core extractions enabled a thorough comparison of the existing pavement's thickness, density, and material characteristics with the proposed design. Based on these findings, a new design for a flexible pavement was developed, focusing on enhancing its ability to withstand rutting. The analysis determines that the existing pavement cannot withstand overloading vehicles, necessitating a 6,67 % increase in the thickness of the surface, a 37,5 % increase in the thickness of the binder, a 50 % increase in the thickness of the base, and a 32 % increase in the thickness of the subbase layers. Significantly, these modifications and improvements to material qualities were discovered to effectively decrease rut depth, an important factor in the durability and performance of pavement

References

1. Q. T. Nguyen, H. Di Benedetto, and C. Sauzéat, ‘Linear and nonlinear viscoelastic behaviour of bituminous mixtures’, Materials and Structures/Materiaux et Constructions, vol. 48, no. 7, Jul. 2015 2339–2351.

2. M. Kaushal and J. Rasool, ‘A STUDY ON IMPACT OF VEHICLE OVERLOADING ON JAMMU-SRINAGAR NATIONAL HIGHWAY’, International Journal of Innovative Research in Engineering & Management, 2022.

3. Y. H. Huang, Pavement analysis and design. Pearson/Prentice Hall, 2004.

4. H. Wang et al., ‘Effects of Field Aging on Material Properties and Rutting Performance of Asphalt Pavement’, Materials, vol. 16, no. 1, Jan. 2023.

5. H. Fares et al., ‘Modelling the performance of pavement marking in cold weather conditions’, Structure and Infrastructure Engineering, vol. 8, no. 11, Nov. 2012 1067–1079.

6. M. Zumrawi and M. M. E. Zumrawi, ‘Investigating Causes of Pavement Deterioration In Khartoum State’, International Journal of Civil Engineering and Technology (IJCIET), vol. 7, no. 2, pp. 2006 203–214.

7. M. Asim, M. Ahmad, M. Alam, S. Ullah, M. J. Iqbal, and S. Ali, ‘Prediction of rutting in flexible pavements using finite element method’, Civil Engineering Journal (Iran), vol. 7, no. 8, 2021 1310–1326.

8. O. J. Oyekanmi and E. A. Ejem, ‘Load Damaging Effects of Overloaded Trucks on Federal Highway Pavement Structures in Nigeria’, in Research Developments in Science and Technology Vol. 5, Book Publisher International (a part of SCIENCEDOMAIN International), 2022, 140–156.

9. A. Tjan and C. Fung, ‘DETERMINATION OF EQUIVALENT AXLE LOAD FACTOR OF TRAILER WITH MULTIPLE AXLES ON FLEXIBLE PAVEMENT STRUCTURES’, 2005.

10. M. Raheel et al., ‘Impact of axle overload, asphalt pavement thickness and subgrade modulus on load equivalency factor using modified ESALs equation’, Cogent Eng, vol. 5, no. 1., Jan. 2018 1–12.

11. H. Wang and I. L. Al-Qadi, ‘Importance of Nonlinear Anisotropic Modeling of Granular Base for Predicting Maximum Viscoelastic Pavement Responses under Moving Vehicular Loading’, J Eng Mech, vol. 139, no. 1, Jan. 2013 29–38.

12. American Association of State Highway and Transportation Officials, Guide for design of pavement structures, 2nd ed. Washington: AASHTO, 1993.

13. Highway Design Manual, SCRB. Republic of Iraq Ministry of Housing and Construction State Commission of Road and Bridges, 2005.

14. F. Ma, J. Xu, C. Gao, and Y. Bi, ‘Study on the Applicability and Modification of the Design Hourly Volume on Rural Expressways Considering Holiday Traffic Polarization’, Int J Environ Res Public Health, vol. 19, no. 16, Aug. 2022.

15. J. Jihanny, B. S. Subagio, and E. S. Hariyadi, ‘The analysis of overloaded trucks in Indonesia based on weigh in motion data (east of sumatera national road case study)’, in MATEC Web of Conferences, EDP Sciences, Jan. 2018.

16. Republic of Iraq Ministry of Housing and Construction State Commission of Roads and Bridges SCRB, ‘Legal Axle Load and Gross Weight Permitted on Motor Vehicle in Regular Operation in Iraq’, 2013.

17. A. M. Mosa, A. H. Taher, and L. A. Al-Jaberi, ‘Improvement of poor subgrade soils using cement kiln dust’, Case Studies in Construction Materials, vol. 7, Dec. 2017, 138–143.

18. Dawood, ‘Determining of Remaining Life of Existing Flexible Pavement Using AASHTO 1993 Design Method’, Journal of Engineering Science and Technology, vol. 13, no. 1, 2018 23–34.

19. E. J. Yoder and M. W. Witczak, ‘Principles of Pavement Design’, Second ed., New York: Wiley, 1975.

Downloads

Published

2024-01-01

How to Cite

1.
Aljaleel ZM, Ahmed NY, Atemimi YKA. Finite Element Modeling to Predicting Rutting in Flexible Pavements under Overloading. Salud, Ciencia y Tecnología - Serie de Conferencias [Internet]. 2024 Jan. 1 [cited 2024 Dec. 2];3:822. Available from: https://conferencias.ageditor.ar/index.php/sctconf/article/view/951